Bushings

"ORIGINAL"
New X-Bushing

DESCRIPTION: 
Our NEW X-Bushing features include: NEW pre-inserted
P-Bushings and our very own ENVIRO-SEAL on each side. The X-Bushing lowers a KTM three different heights from stock. It will lower the rear 1/4”, 3/8”, or 7/8” in just minutes. It does not rust, it is easy to maintain and super easy to adjust. The X-Bushing maintains the shocks Valving set up and it slightly changes the angle of the shock, which enables the shock to become progressive sooner in the stroke, and helps stabalize the bike and promotes better handling in the turns, whoops and down hills. Shorter riders can benefit greatly from a slightly lowered bike.

KTM big bikes from 1999-2010
KTM 85cc-105cc with PDS shocks 

The X-Bushing has been featured recently in 2010 February "Dirt-Rider" Magazine "New Products" page. If you have seen us in the magazine, then use the coupon name "Dirt-Rider" to recieve $5 off your purchase during checkout.

The X-Bushing has also been featured on page 106 of October 2009 "Dirt Bike Magazine".

PRICE: $80 USD

"ORIGINAL"
 New F-Bushing

DESCRIPTION: In 2002, we created the F-Bushing, which is a direct replacement of the OEM heim joint. It can not rust and was designed for harsh environments. Synergy Seals recently re-engineered it with our NEW pre-inserted P-Bushings, which acquire very high dynamic loads.The F-Bushing is very easy to install and very easy to maintain, especially if you use our Z-Bolt. Riders will benefit greatly with the F-Bushing from its durability, longevity & performance.

KTM big bikes from 1998-2010

PRICE: $42 USD

"ORIGINAL"
New Z-Bolt for KTM

DESCRIPTION: The Z-Bolt has a Zerk fitting and cap which makes lubricating your F-Bushing or X-Bushing very easy. It is a Grade 8 bolt with zinc plating for corrosion resistance. Available for KTM big bikes 1999-2010 and KTM 85cc and 105cc with PDS shocks.

PRICE: $30 USD

"ORIGINAL"
New P-Bushing for Husqvarna

DESCRIPTION: The P-Bushing is one of our new lines of products. The P-Bushing replaces the shock roller bearing in the linkage rocker arm. The dynamic load is greater than the OEM needle roller bearing….and does not rust! So longevity, durability and rideabilty is back in the picture! Get one today!

PRICE: $12 USD

Seals

"ORIGINAL"
Rigid Dual Lip Fork Seals

DESCRIPTION: Our Rigid Dual Lip Fork Seal is one of a kind. Our proprietary material along with our custom design creates a seal that out performs any seal on the market. We created a seal that is silky smooth, does not have drag, will not suck air, will not allow water or dirt past the pre-wiper lip and with stout features for durability.

PRICE: $29.99 USD

"ORIGINAL"
WP 48mm Lower Guide P-Bushing

DESCRIPTION: Our NEW P-Bushing for WP 48mm forks, replaces the OEM DU bushings. Our P-Bushings aquires higher dynamic loads than OEM, it does not wear down like the PTFE lined OEM DU bushings and is super slippery. It is easy to install and easy to remove. It should never have to be replaced under any riding conditions. The P-Bushing is sold in pairs, or can be purchased as a kit,, which includes Synergy 48mm Rigid Dual Lip Fork Seals

PRICED: $24 USD per pair

"ORIGINAL"
Flex-Seal Fork Seals

Please CLICK the picture to follow the link for prices.

SOLD AS PAIRS ONLY

Picture Shown: 50mm Marzocchi Fork Seals

DESCRIPTION: Our Flex-Seals Fork Seals are available in stock.

"ORIGINAL"
Shock Seals

DESCRIPTION: Our WP 18mm shock replacement seals dominate over OEM. Our seals do not roll like the quad ring. How you ask? The middle lip is in between the two outer lips, so the pressure points are on each lip separately to allow the seal to energize when pressurized. Our material is proprietary and not the same as OEM BUNA rubber.

PRICE: $12.95 USD

Kits

"ORIGINAL"
F-Bushing with Z-bolt

DESCRIPTION:
Direct OEM Miem Joint replacement for KTM off road big bikes from 1998-2010.
Lubricate your F-Bushing with ease when you get the Z-Bolt!

PRICED RIGHT AT: $67 USD

"ORIGINAL"
X-Bushing with Z-Bolt

KTM off road big bikes from 1998-2010
KTM off road 85cc-105cc with PDS shocks

The X-Bushing has been featured recently in 2010 February "Dirt-Rider" Magazine "New Products" page. If you have seen us in the magazine, then use the coupon name "Dirt-Rider" to recieve $5 off your purchase during checkout.

The X-Bushing has also been featured on page 106 of October 2009 "Dirt Bike Magazine".

PRICED RIGHT AT: $105 USD

"ORIGINAL"
WP 48mm Seals w/ Lower Guide P-Bushing -48